Repair of the truss system of a wooden house. Roof repair - installation of a new coating, repair cost and recommendations on the choice of tools and materials (100 photos)

Many owners of private houses are faced with a rather unpleasant problem that can arise at any time - this is a leaking roof. Of course, repairing the roof of a private house is a rather serious problem, so it must be solved as soon as possible, otherwise it can lead to more significant significant troubles in the house.

To solve this problem, you can, of course, turn to the services of professional specialists who will do everything quickly and efficiently, but in this case you will have to spend a significant amount of money. And you can do everything yourself.

As a rule, the majority chooses the second option, while solving this problem will require a lot of effort and spend a lot of time and patience. This article will help you in solving the problem that has arisen, where there will be a lot of useful information.

Roof preview

Primarily overhaul roofs, you must begin with an inspection, find out the degree of damage to the roof and its scale. It is preferable to inspect in rainy weather, when you can see the places of leakage. And only after a complete inspection of the rafters, waterproofing, it is possible to draw any conclusions on the restoration work.

It is necessary to carefully and carefully check everything so as not to lose sight of anything. So, for example, you need to take a good look at everything wooden elements for the presence of dark and damp spots, which is a sign of constant moisture.

Particular attention should be paid to the roof, because the main problem of leakage comes precisely because of its wear or damage.

Further inspection must be carried out with outer side for damage. First of all, you need to pay attention to the most upper part roofs are a strong point, visually inspect whether it is intact and in what condition its moisture-proof layer is.

After that, you need to inspect the junctions of the roof to the sewer storm pipes, since these places are the most vulnerable.

At the same time, it is also necessary to check and inspect the condition of the metal aprons on the pipes. After that, it is necessary to inspect the entire gutter, they may be clogged with foliage or tree branches that need to be removed.

Causes of a leaking roof

A roof can leak for several reasons:

violation of the hermetic integrity of the roof;
leakage may occur at the joints roofing material;
any damage possible drainage system.

These are the most common and common causes of roof leaks, and this is where the problem lies in most cases.

Repair and restoration of rafters

The roof truss system has a very importance- this is due to the fact that the rafters take on almost the entire main load of gravity from the roof, as well as from the severity of the snow cover, from the flow of rain and squally gusts of wind.

Therefore, if there is any noticeable damage to the rafters, they must be repaired immediately or additionally reinforced with wooden linings.

If the rafter is rotten almost to the middle, then in this case it is necessary to remove the rotten part, and instead mount a metal prosthesis.

At the same time, while this prosthesis is being prepared, wooden block spacers or racks are temporarily installed under the rafters. When the prosthesis is installed on the rafter, then all this is removed.

Replacement and restoration of waterproofing and thermal insulation

It happens that due to the prolonged leakage of the roof, the insulation becomes unusable, as a result of which it loses its thermal insulation properties. Therefore, it must be replaced immediately.

At the same time, it is necessary to check each tile of the insulation by touch, if it is damaged or wet, then it is certainly necessary to replace it with a new one.

Secrets of repair work with roofing materials

metal tile

The metal tile is a fairly high-quality roofing material, however, even such a coating can become unusable over time.

And the first signs that this coating needs to be repaired: there is rust on the sheets of metal tiles, signs of paint peeling are visible on the sheets and there are visible deflections, cracks and chips on the roof.

All this indicates an urgent repair of this coating. Replacing a sheet of metal tiles is not at all difficult. In this case, it is enough to unscrew the screws with a screwdriver and remove the damaged sheet and replace it with a new one.

Steel seam roof

Steel seam roofing is a fairly common type of roofing, and is also considered one of the most reliable and durable roofing materials. But even this type of roof can be damaged, requiring urgent replacement or current repairs.

As a rule, for this it is enough that gaps begin to appear in the steel roof. large sizes, in this case you can do repair work. Here, gaps can be sealed with a special waterproof silicone sealant.

If the roof is damaged paintwork, in this case damaged surface cleared of old paint, then it is degreased and only after that paint of the corresponding color can be applied to the surface of the roof.

If the rotten sections of the roof are not of a significant size, then in this case it is allowed to lay on the damaged area new leaf steel and securely fix it using seam connections.

Slate

Slate is the cheapest and most common type of roofing material. However, it is considered the most problematic among all types of roofing.

The most common and frequent damage to this type of roof is cracks and chips. Therefore, if a sheet with such signs of damage is found, it must be replaced.

In this case, it is necessary to lift the nails a little higher on adjacent sheets of slate so that it is possible to remove the damaged sheet and put a new one in its place.

Repair of the roof of an apartment building

Here's the roof repair. apartment building is a rather complex and lengthy process. Roof damage areas high-rise buildings it is not difficult to determine, it is important to visually inspect the entire surface of the roof.

As a rule, everything multi-story houses as a roof they have roofing material. Therefore, it should not have breaks and damage, if there are such signs, then the damaged area must be removed or, if possible, smoothed out with a gas heater. After that, bitumen or a new piece of roofing material must be applied to this area.

Of course, the cost of roof repairs can be different, it all depends on the degree and scale of damage. You can, for example, get away with replacing one sheet of slate, or you can replace almost the entire roof entirely.

Therefore, in order not to incur large financial costs, it is necessary to inspect the condition of the roofing once a year in order to prevent major repairs to the roof.

It should be noted that the condition of the house depends on the condition of the roof. It is impossible to debug the repair of the roof for later, if the situation requires it. If you do everything yourself, but you have any difficulties or questions, you can see how it is done in the roof repair photo. Perhaps this will help you solve your problem.

Roof repair photo

Sooner or later, no matter what materials were used to create the roof, it begins to collapse. Leaks form, materials deteriorate, deteriorate appearance and the owner of the building has to urgently take measures to repair or completely replace the roofing. Roof repair is easy to do with your own hands, if you know the main stages of work and the materials that are used for this.

Roof inspection

Owners of private buildings rarely make scheduled repairs to the roof of the house, only when this can no longer be avoided. And in vain, since minor defects are easier to eliminate until they have grown to serious proportions. After all, if at least once a year an inspection and scheduled repair of the roof of a private house is carried out, then major repairs may not be needed soon. Such prevention will not require large financial investments, but will help save the owner from unplanned expenses and force majeure.

Serious mechanical damage

All types of repairs can be divided into four categories according to the degree of complexity.:

small;
capital;
planned;
complete reconstruction.

Sloped roofs require less maintenance than flat roofs due to their advantageous design . (Repair of flat roofs is described in detail in the article of the same name). Melt or rain water does not linger on roofs with a slope, therefore, if it usually leaks, it is due to technological shortcomings during its construction or due to the statute of limitations of construction.

Coating Inspection

Preventive inspection is very important, so even if the ceilings in the house are dry, regular inspection is necessary. truss system at home . Such inspections are traditionally held four times a year. In the spring, the roof is inspected for winter damage, in the summer for debris removal, in the fall for problems before a long winter period, and in winter - if necessary, snow removal. Sloped roofs do not need to be inspected as often as flat roofs and can be checked twice a year.

Based on the results of the inspection of the top of the roof and its wooden frame a repair plan is drawn up with a calculation necessary materials.

Roof wear

When examining a sloping roof, attention should be paid to:

Search for mechanical damage.
Detection of corrosion, fungal and putrefactive lesions of wooden rafters.
Determination of the temperature of parts of the structure.
Assessing the moisture content of a wooden frame.
Determining the condition of the roofing from a technical point of view.

Roof maintenance

In addition to routine inspections, measures should be taken to clean the roof from snow masses in winter, as well as the removal of contaminants and do-it-yourself preventive repairs. Care must be taken when cleaning a sloped roof in winter.

When removing snow, metal tools should not be used to avoid mechanical damage to the roof surface.

The application of dents or scratches can lead to further development of corrosive processes. For such activities, it is safer to use wooden shovels, as well as plastic panicles or scoops. Plywood boards can be used to clean large surfaces.

Clearing a sloping roof from snow

In the warm season, roofs are cleaned of dirt and leaves with their own hands, examined for signs of animal claws.

While on the roof in winter, do not get too close to the edge. Installation and repair of the roof of an inclined type should be carried out in compliance with safety rules.. It is recommended to use safety belts and move only on special paths.

Minor Defects

The result of violation of the integrity of the structure

Dampness or slight ingress of moisture can contribute to the occurrence of fungal or putrefactive lesions of the wooden frame of the truss system. This is a rather serious problem, because such a roof may need large material costs for repairs and a serious amount of work. Such lesions spread very quickly and can completely capture the entire structure, therefore, if rot is detected, a complete removal of the affected wooden element is required and replaced with a treated new one. After the repair of the building frame is completed, you can, if necessary, repair the roof covering.

Damage slate roof usually repaired on site. Asbestos cement sheets that cannot be repaired are replaced, and those that are still intact enough are repaired using patches and glue. Repair of tiles or other piece materials occurs in a radical way - with the replacement of damaged elements with new ones.

Slate roof reconstruction

Minor repairs the roof of a private house includes, in addition to eliminating leaks, its painting and cleaning. Some types of roofs, such as galvanized roofs, have a fairly long service life, so they need periodic cleaning and painting to prevent corrosion. Before painting, the corroded surface is cleaned of rust special composition. The frequency of painting such a roof is once every 3-4 years.

Minor repairs tiled roof

Rafter system repair

Strengthening damaged elements

On the rafters of the wooden frame lies the entire weight of the roof, it is they who take on not only the weight of the roofing material, but also precipitation(flows of rainwater, snow masses), as well as gusts of wind. If a routine inspection revealed damage to the rafters, then you should not waste time. A broken rafter may not withstand the load and collapse along with the entire roof.. The need for a major overhaul of the truss system arises only if half of its entire area is damaged by rot. Most often, damaged elements are replaced.

Repair of the rafter system in case of damage to the rafter leg in stages:

If a rafter break occurs, then a jack is installed on a previously prepared board, with which the parts are aligned and connected.
The damaged place is well cleaned and strengthened with meter boards on both sides, their thickness should be at least 3 cm.
The fastening of the overlays to the rafters takes place with long nails.
Holes are made with a diameter of 16 mm for mounting bolts (4 on each side).
Bolts are inserted and tightened.

Strengthening the rafters with overlays

At large area injuries use bar prostheses. Replacement of the affected areas occurs as follows:

At the site of damage, the sheathing, insulating materials and roofing are removed. Then the crate is disassembled.
The rafters are supported by temporary racks, which are removed at the end of the work.
Remove rotten parts of the structure.
The prosthesis is put on the rafter leg, it should be 2-2.5 times longer than the affected part of the board.
The reliability of work is checked, after which the racks are removed.

Strengthening the rafters with a prosthesis

In a similar way, parts of the Mauerlat that have undergone a rotting process are replaced.

Sometimes it happens that the rafters are intact, but the crate is damaged, and is no longer able to bear the weight of the roof. Because of this, the roof can sag and crack. In this case, reinforcement or complete replacement of the crate is done.. In this case, the timber is placed between the rafters, and the boards are stuffed in the transverse direction.

Roof reconstruction

Usually, do-it-yourself roof reconstruction is resorted to when there is a need to equip an additional habitable room in the attic space.

This is a rather serious manipulation, requiring a complete change in the entire truss system. At the same time, not only the external decorative look and roofing material, but also all systems of hydro, heat and sound insulation.

First, the roofing is removed, then the entire truss system is dismantled.

If at the same time it is planned to install a roof with attic room, then the choice of the type of roof will be carried out between the hip and half-hip roof, which are more suitable for this option and allow you to get the maximum space.

Inclined roofs are recommended to be installed with your own hands using a profiled sheet and an angle of inclination up to 50 degrees. In winter, during heavy snowfalls, snow masses will not linger on such a surface, which will significantly reduce the load on the truss system. In this case, during the construction of the roof, it is possible to use wooden material for rafter legs of smaller section.

Roof integrity is the #1 task of any homeowner. The thermal insulation of a residential building, as well as dryness and comfort inside it, directly depend on this. And if the integrity of the roof is broken, repairs are required, and repairs are urgent.

emergency;
capital;
and planned.

The first is performed in emergency situations. The second involves the complete replacement of the roofing material and even the lag (all or some). And the third solves the problem of eliminating minor problems with the roof and extending its overall service life.

Let's try to figure out: how and when to carry out this or that type of repair? What materials and tools will be required? And is it possible to manage on our own, without the involvement of specialists?

Roofing materials

All currently existing roofing materials can be divided into 2 large groups:

Soft, which include non-rotting canvases and cardboard. Both that, and another on special bituminous or bituminous and polymeric impregnation.
Rigid. it roofing iron, slate, as well as tiles of various types.

Soft roofing is more cost-effective because it is cheaper and easy to install. However, she has whole line disadvantages:

short service life, from 3 to 7 years, no longer;
exposure negative impact climatic conditions(destroyed by rain, snow);
exactingness to the flooring in several layers.

That is why, when it comes to roofing, homeowners today increasingly opt for rigid materials, despite the difficulty of laying some of them.

Repair or replacement of slate roof

Slate is a special finishing plate made from asbestos cement. It can be of different shades and different configurations: flat, wavy, embossed. Its only drawback is the tendency to crack due to brittleness. Therefore, the first sign of the need for roofing repairs is cracked slate slabs. To assess the condition of the slate, you need to go upstairs and determine the extent of damage, complexity, volume and sequence of repair work.

If there is a lot of defective slate, it makes sense to replace the coating completely. If the damage is small and in a modest area, you can not change anything, but fix the roof using an adhesive prepared on your own, according to a special recipe.

Bonding activities should be performed correctly on a dry, non-hot day. Then the composition will dry faster.

To repair minor defects on the slate, follow the following step-by-step instructions:

First, the roof must be swept and rinsed with a hose in the most thorough way.
Then primed with a composition of water (3/4) and PVA glue (1/4).
Next, you will need to prepare the same, special adhesive composition: mix frost-resistant water-based paint E-AK-111 (1 part), cement grade M300 (1 part) and loose asbestos (3 parts). After mixing the ingredients, you should get a mixture that resembles thick sour cream in consistency. But it should not be cooked a lot at once, because it tends to dry out rather quickly.
With a freshly prepared solution, it is necessary to smear all the damaged areas found, as well as the places where the slate is attached to the roof frame and at the joints.
After applying and drying the first adhesive layer, it will be necessary to spread the composition a second time. And then the third and even the fourth. Each layer is applied thickly with a paint brush. And completely dry. Such repairs can extend the life of slate blood by another 9-10 years.

It is more convenient to cover the roof with an adhesive composition using a ladder with parallel overlays.

Replacement of slate sheets

If the slate roof is badly damaged, it will need to be redone. This should be done in stages:

Soft Roof Repair

If partial replacement is required soft cover roof, it is necessary to cut down the defective area to the screed. And lay on this place new material using liquid bitumen and using gas burner. And all seams, joints and junctions will need to be tarred.

Carrying out repairs soft roof, most importantly, remember the danger with which such work is associated. You need to protect yourself with special clothing and special protective equipment. And if you do not have the skills to conduct such events, it is better to entrust them to experienced professionals.

Replacing or repairing a metal roof

Today many owners country houses prefer to change existing roofing for new ones - high-quality, technologically more modern, beautiful and durable. These, of course, include metal roofing. True, it is used only for sloping roofs, and if the angle of inclination is less than 15 °, it will be necessary to additionally process the adjoining sheets with a moisture-resistant sealant.

The sequence of work for the complete replacement of the roofing with metal tiles is as follows:

At the very end, it is necessary to paint the places of damage to the upper layer of the metal tile (and this is possible with self-coating) with paint color to color.

Roll roof repair

Soft roll roofing should be inspected annually for defects. If this is not done, very soon the complete destruction of the sheet base will follow, and then the roof structure itself will begin to become unusable.

If defects are soft roll roofing found during visual inspection, the following should be done:

Membrane roofs: basic principles of repair work

Features of the membrane coating

Worth mentioning separately membrane roof. This material is new in construction, but it is already conquering the market, and quite actively. It has a lot of positive properties, including:

high strength;
excellent indicators of moisture insulation;
durability (service life up to 50 years);
the possibility of installation on any grounds (shape, coating), up to green roofs;
maintainability.

Basic principles of repair work

Membrane roof coverings are indestructible. They only have one weakness- seams. And here on them in some PVC ground– or the TPO membrane may rupture. Therefore, the repair of such a roof is reduced to restoring the tightness of the seams between the pieces of the film web. However, chemical and mechanical damage is still possible. roofing membranes. And then, too, will have to impose patches.

Exploitation wooden houses of old buildings is associated with periodic maintenance and repair work on all the main structures of the structure, including the roof. The main defects are the deflection of the supporting elements of the roofs and the appearance of leaks. In each case, it is necessary to find out the causes of the problem and take steps to eliminate them. Timely roof repairs wooden house will avoid serious consequences, the elimination of which will have to spend much more financial resources.

To check the roof for deflection, you need to move away from the house and look at the line of the ridge. If it is flat relative to the mentally drawn horizon line, then the truss system is in order. Seasonal movements of the structure do not affect the condition of the roof. The condition of the foundation and embedded logs of the object does not cause concern.

If the ridge line deviates from the imaginary horizon line, then we can talk about the presence of a deflection of the roof resulting from the natural deformation of the ridge beam resting on the gable rafters. To verify this, you need to inspect this element, climbing into the attic.

Roof deflection visible to the naked eye

Why does the ridge beam sag

The deformation of the ridge beam may be due to a mistake made by the builders at the stage of roof construction when choosing building materials. If a poorly dried log that did not reach the required degree of strength was used as a ridge beam, then it will definitely bend over time under the weight of not only its own weight, but also the weight of the roofing, as well as the action snow load.

Important ! To prevent the ridge from sinking, it is necessary to build additional supports and install them between the gable rafters. This is precisely the repair of the roof of a wooden house in this situation. First, the sagging log is leveled with a jack until it reaches as even a line as possible, and then an additional support is installed.

Leveling the ridge log with a jack and installing an additional support

If a ridge beam was not used in the construction of the rafter system, but there is a subsidence of the roof in the ridge, then the reason lies in the deformation column foundation actively used in the construction of wooden houses. With uneven shrinkage of the foundation pillars, the roof sags in the place where the supports sank the deepest. This problem is typical for log houses five-wall. In this case, the defect is much more difficult to eliminate. After all, in addition to the roof, you will have to level the house itself.

Elimination of the consequences of sagging foundation pillars by installing a new embedded log and wooden spacers

In this scheme, the following elements of the structure are indicated by letter symbols:

A - A new mortgage log installed during repairs.
B - Place of cutting bearing walls.
B - Line showing the deflection of old embedded logs before the repair.
G - The most sagging pillar of the foundation.
D - Spacers made of wood.

During the repair, the builders will raise the house, eliminate the deflection of the walls, and install the object on new embedded logs. Adjust the height support pillars foundation using spacers cut from wooden beam durable rocks that will prevent further subsidence of the walls in places of cutting. This work must be entrusted to a team of professional builders.

Important ! Roof deflection can cause damage to the roof covering, increasing the chance of rainwater leaking.

Causes of subsidence of the roof on the slopes

If, with a relatively even ridge, deflections of the roofing surface are noticeable on one or both slopes, then this is due to the deformation of the rafter legs. When inspecting the condition of the rafters, pay attention to their straightness, and also check the integrity of the material: there should be no breaks and deep cracks.

The deflection of the rafters indicates errors made in the calculation roof structure. The insufficient rigidity of the rib of the rafter leg is not able to withstand the weight of the roof itself and the pressure of snow accumulating over the winter. The largest deformation occurs in spring time when the mass of the melted snow layer presses on the roof with the greatest force.

Important ! You can eliminate the deflection of the rafter legs on your own, without resorting to the help of specialists. There are two ways to increase bearing capacity rafter legs: installation of props or struts. Although the presence of struts will make it difficult for free passage in the attic, it will ensure the strength of the rafter legs and prevent the roof from sagging.

Installation of spacers allows you to eliminate the deflection of the rafter legs

Installation of spacers and timing of replacement of rafters

How to install the spacer

With the help of two jacks, it is necessary to slowly squeeze out both rafter legs in places of deflection.
First make cuts at half the thickness of the rafters, into which the spacers will be inserted.
Mount the spacers between the rafters, inserting them into the prepared grooves, and secure with nails.

Important ! You can not make grooves in the rafters, but immediately nail the spacer bar to them.

When the rafters are changed

When repairing the roof of a wooden house that has served for decades, the strength of the rafters is checked with an ax, making a shallow incision. The spilled dust, resembling a light brown powder, is the result of a deep damage to the wood by a bug. If the wooden elements of the roof structure are also infected with a fungus, and also have extensive rotten areas, then they must be urgently replaced.

Carefully check the roof lathing: rotting areas can lead to premature wear of the entire structure

Paying attention to the crate

A thorough inspection also requires a plank roof lathing, which can rot from constant wetting. The appearance of traces of water smudges indicates a leaky roofing and about a poor waterproofing substrate that does not protect attic space from moisture ingress. It is impossible to put up with this situation, because not only structural elements roofs, but also a ceiling shield.

If the problem is local in nature, then a partial repair of the roof of a wooden house can be carried out. In the case of a large number of leaks, a complete replacement of the roofing material that has served its time is necessary. In this case, the installation of the roof is done taking into account modern requirements required for the installation of battens, waterproofing and laying of the selected coating material.

Important ! In the event of mechanical or other damage to the roof, water that falls on the waterproofing substrate flows down it into the drainage system and is discharged from the house.

Repair and replacement of slate

On wooden houses of old buildings, slate or roofing iron was used for roofing. Signs that indicate that it is time to repair the roof of a wooden house, covered with slate sheets, include:

the appearance of cracks of various sizes;
the presence of holes from nails in the lower waves of the slate sheet;
lack of rubber pads under tin plates placed under ordinary nails;
mossy old slate;
damaged sheet edges;
brittleness and brittleness of the material.

Important ! Damage to the lower waves of slate sheets is especially dangerous, because rain and melt water flows down them, which is formed during the melting of snow.

Inspection of the slate roof and ridge for the likelihood of leakage

Quick repair of damaged slate

With a lack of financial resources to purchase new material and carry out a full-fledged repair of the roof of a wooden house, cracks in the slate can be repaired with cement and a bandage. This option will temporarily eliminate the flow of water.

Work is carried out according to the following algorithm:

Using a brush for metal, they clean the place of cracking of the slate from moss and blackness, wetting it with water.
A mixture of cement (0.5 parts) and asbestos (1 part) is prepared, after thorough mixing of the components, water is added to obtain a liquid solution.
Apply a small amount of the solution to the injury site.
The bandage, folded in three layers, is moistened in the prepared mixture for one minute, after which it is pressed against the surface of the slate and carefully smoothed. The bandage should be a few centimeters longer than the length of the crack.
Three hours later, the dried bandage is covered with a layer of varnish or gray paint.

Important ! Remember that such a slate repair will last no more than two years. During this time, the owner needs to find funds to replace the old roof.

When laying a new slate, it is necessary to use special nails that provide waterproofing of the fastener. Holes for fasteners are pre-drilled in the upper wave of the sheet, after which nails are driven into them. Neighboring sheets are overlapped by one wave. Rows of slate overlap each other by 15 cm.

Important ! The roof ridge must be protected by a waterproof material, the integrity of which must also be monitored and corrected in time.

Repair of the iron roof of a wooden house

On many houses of the old buildings, you can see roofs made of iron and painted red-brown. The fashion for such roofs appeared in the 70s of the last century. It is clear that at that time ordinary iron was used, which did not have a zinc coating that saves the metal from corrosion. Repair of such roofs comes down to cleaning the surface of rust and old paint, followed by painting.

Rust spots need to be cleaned and the roof repainted.

Waterproofing of junctions of the roof to the chimneys

Special waterproofing protection is required at the junction of the roof to the chimney or ventilation pipe, which often cause water leaks into the under-roof space. The ingress of moisture in this important area negatively affects the brickwork of the chimney, as well as ceiling surface adjacent to it. Modern materials, such as liquid rubber, bitumen-polyurethane mastics, etc., allow solving the problem of waterproofing adjoining units once and for all.

However, in addition to this, a number of constructive solutions to reduce the chance of leakage. At the stage of laying the chimney, a visor protruding half a brick is made, covering the place where the roof adjoins the pipe wall and protecting it from precipitation. Another technique, on the contrary, provides for a recess in the wall the size of a quarter of a brick. Roofing material is introduced into this gap.

Important ! During repair work on waterproofing the junctions in the walls of the chimney, a strobe is cut out if the stove-maker did not foresee the presence of a recess when laying the chimney pipe. Soft roofing material is inserted into the strobe and pressed against a metal rail, which is fastened with self-tapping screws. Then the polyurethane sealant is poured into the junction of the rail with the wall.

The pipe must be protected by an umbrella

To prevent moisture from entering the chimney, it is necessary to install a cap or a protective umbrella on it. This element protects the top brickwork chimney from constant wetting, leading to the destruction of its walls and falling out of individual bricks.

Installation of a drainage system

Without a drainage system, the roof cannot fully perform the functions assigned to it. After all, water flowing from the roofs will fall on the walls of the house and the foundation, which will ultimately affect the life of the wooden structure. In many private houses there is some semblance of gutters, designed by the owners themselves from improvised materials. Currently, for each type of roofing material, it is possible to select suitable elements of the drainage system, which not only collects and diverts rain water in a safe place for the home, but also perfectly complements the design of the roof and home decoration.

Many start repairing the roofs of wooden houses for aesthetic purposes, replacing the old faceless coating with a new bright roofing material. The market is filled with a variety of offers that allow you to transform wooden house beyond recognition. In combination with wall finishing materials the new roof turns an ordinary building into a small palace.

Installing or repairing gutters will protect the walls and foundation of the house from water running off the roof.

Installation of new roofing materials should be carried out by professionals, because you need to know and comply with a number of technological requirements. However, approach the choice of a company carefully, collecting information about its activities. Serious firms have a website that displays photographs of repaired roofs. There is information about the legal and actual location of the company's office, numbers are indicated not only mobile phones but also stationary.

It is best to choose those companies that have done a good job with the repair work at the facilities of your acquaintances and friends. This is the best and a win-win! Serious companies know that satisfied customers are an excellent advertisement for services and use it. We think none of you will refuse to join the ranks of satisfied customers.

Replacing the roof of a private house is a task that every homeowner faces sooner or later.
This type work involves complete removal old roofing material in order to lay a new one, as well as the replacement of roof waterproofing, thermal insulation, repair or complete replacement of the truss system.
Difficult and somewhat dangerous work requires vocational training and experience, and therefore should be entrusted only to specialists.

Our company carries out professional installation and replacement of the roof with a preliminary expert examination of the object. We work in Moscow and the Moscow region at private housing construction sites and summer cottages.

Replace completely or repair?

Practice shows that in most cases it is enough to carry out current or major repairs of the roofing, however, in situations of complete wear of the covering material or significant damage to the roof structure, it is impossible to avoid complete replacement roofs. There are other, more specific reasons for replacing roofing material. Among them:

regular strong leaks;
the spread of the fungus along the crate, the presence of rot in the elements of the truss system;
wear thermal insulation material, waterproofing.

Replacement metal roofing, roll and other material is sometimes required in case of a change in the appearance of the house (for example, replacing flat roof on a slope).

Laying the roof on a new truss system allows you to choose any material for decoration. While maintaining the same old rafters, we recommend choosing a profiled sheet or metal tile: these materials best cover the defects of the old frame.

Stages of work

Replacing a roof made of slate and other materials is carried out by our specialists as responsibly as possible, and therefore work always begins with a thorough examination of the current state of the roof, including the truss system. Depending on the degree of wear of materials and wishes for future flooring, a decision is made to completely rebuild the roof or to update only the covering layer.
At the second stage, the old coating is removed, if necessary, the insulation is replaced. If a decision is made to rebuild the rafters, then they also change.
After finishing preparatory work our specialists lay the new waterproofing material and the crate under the new roofing material.
Laying a new roof on the prepared crate.

Replacement of slate roofing and other coatings is carried out by our specialists under an official contract. All work is covered by a 3-year warranty.

House roof replacement: price

The price of roof replacement work is calculated based on the cost of the selected materials, the level of complexity of the upcoming events, the time of year (roof replacement in winter and summer has slight differences in price). Our experts will help you calculate the price per 1m2 for roof replacement. The master will also answer questions about how much it costs to replace the roof, help you choose the material and make an accurate cost estimate.

Give us a call and schedule a free consultation with a specialist at your site. We will come to any district of the Moscow region at a convenient time for you.